Short block, part engine or complete engine
A short block consists of the engine block, crankshaft, pistons and connecting rods. Cylinder head, timing drive and all ancillaries are carried over from the old engine — which assumes those parts are in good order, and it is the cheapest variant.
A part engine adds the cylinder head and usually the timing drive to the short block. The complete engine additionally comes with ancillaries such as the intake manifold, injection system, turbocharger or auxiliary units — exactly which parts are included differs per listing and is stated in the item description.
For costing, it is not the purchase price alone that counts but purchase price plus the additional parts needed plus installation time. A short block can work out more expensive than a complete engine if the cylinder head or timing drive also has to be replaced.
Used, reconditioned or new
Used engines come out of vehicles and are inspected before sale; mileage and condition are documented on the item page, along with photos of the actual engine. They are the cheapest option and often the right one for older vehicles.
Reconditioned engines have been stripped, cleaned, measured and rebuilt with new wear parts. The scope of reconditioning differs by supplier and is stated in the item description. New engines are unrun units.
Also check whether a listing is priced with or without old-part return (deposit) — this is standard for replacement engines and is indicated on the item page. Statutory warranty (Gewährleistung) of 12 months applies to used engines, 24 months to new parts.
Correct identification — and what belongs with the installation
What governs is the engine code, not the vehicle model: CFCA, DXDB, CRTA, N47D20, OM651 and so on. It is on the engine block, in the vehicle data record, and usually in the service book. Two vehicles of the same model and year can have different engines; conversely an engine code often spans several models and brands within a group.
If you cannot determine the code reliably, the VIN is enough — we will match the right engine from it. The vehicle assignment on every item page comes from the compatibility data of that listing.
On installation: the cause of the original failure must be fixed. Engine damage from overheating, oil starvation or a defective turbocharger will repeat on the new engine if the cooling system, oil supply or turbo are not checked as well. Oil, oil filter, coolant, gaskets and stretch bolts should always be new; on manual transmissions the clutch and dual-mass flywheel should be assessed while the engine is out.
FAQ
- What is the difference between short block, part engine and complete engine?
- The short block covers the engine block, crankshaft, pistons and connecting rods. The part engine adds the cylinder head and usually the timing drive. The complete engine additionally brings ancillaries such as intake manifold, injection system or turbocharger. The exact scope of supply is in each item description.
- What details do I need to find the right replacement engine?
- The engine code (e.g. CFCA, N47D20, OM651), found on the engine block, in the vehicle data record and usually in the service book. Vehicle model and year alone are not enough. Alternatively the VIN is sufficient — we will match the right engine from it.
- Used or reconditioned — which is the better choice?
- That depends on vehicle age, residual value and how long you plan to keep it. Used engines are cheaper and often the economical choice on older vehicles; reconditioned units have been stripped, measured and rebuilt with new wear parts. The scope of reconditioning is in the item description.
- What warranty does Molly Motors supply engines with?
- Statutory warranty applies: 12 months on used engines, 24 months on new parts; our T&Cs apply for commercial buyers. Used engines are inspected before sale and documented with photos and a condition description.











